Kenmore ice maker Reset : Resetting the Kenmore Ice Maker(A Comprehensive Guide)

Is your Kenmore ice maker not making ice ?

Don’t worry, you’re not alone. This is a common problem with Kenmore ice makers. The good news is that it’s usually an easy fix.

Kenmore ice maker Reset : How to do it ?

To reset the ice maker, turn off the ice maker switch, wait 5 seconds, turn on the ice maker switch, press and hold the reset button for 5 seconds, and move the feeler arm up and down several times.

The feeler arm is a small, metal arm that detects when the ice bucket is full. If the feeler arm is blocked or not working properly, the ice maker will not stop making ice. By resetting the ice maker, you can clear any blockages and help the feeler arm work properly.

Kenmore ice maker Reset

If your Kenmore refrigerator ice maker has stopped producing ice, a reset can often get it working again.

Resetting your ice maker is a quick and easy fix that you can do yourself in just a few minutes – no tools required! In this guide, I’ll walk you through the steps to reset your Kenmore ice maker and get it back to making ice.

Why Your Kenmore Ice Maker May Need a Reset

There are a few common reasons why your Kenmore ice maker might have stopped working and need a reset:

1. Ice Maker Arm is Stuck

The ice maker arm is responsible for detecting when the ice bin is full. If it gets stuck in the down position, the ice maker will think the bin is full and stop producing ice. Resetting will move the arm back to the upright position so ice production can resume.

2. Frozen Ice in the Tray

If cubes get stuck in the ice tray, they can jam up the ejection mechanism. A reset can often dislodge stuck cubes and get things moving again.

3. Ice Maker Cycle Interruption

A power outage or someone accidentally turning off the ice maker can interrupt the ice making cycle. Resetting will restart the cycle so fresh ice can be made.

Step-by-Step Guide to Reset a Kenmore Ice Maker

Resetting a Kenmore ice maker is a quick and straightforward process. Follow these steps:

1. Locate the Reset Button

The reset button is located right on the ice maker assembly. Look for a small circular button labeled “Reset” on the front or side of the ice maker.

2. Press and Hold the Reset Button

Press and hold the reset button for 3-5 seconds. You’ll likely hear a click sound when the reset cycle initiates.

3. Wait for Reset to Complete

It takes up to 90 minutes for the reset cycle to finish. The machine will go through a series of steps to clear any jammed cubes and reset the arm position. Do not interrupt the cycle.

4. Test the Ice Maker

Once the reset is complete, test the ice maker by grabbing some ice. If no cubes come out, give it another hour or two and test again. The first batch of ice can take some time to be produced.

5. Check Water Supply if Needed

If the ice maker still isn’t working after resetting, check that the water supply line is turned on and not frozen or kinked. Make sure the water inlet valve is functioning properly.

Troubleshooting Common Reset Issues

If your Kenmore ice maker still isn’t working after a reset, try these troubleshooting tips:

  • Confirm the freezer temperature is around 0°F. If it’s too warm, ice production will be impacted.
  • Make sure nothing is blocking the ice maker arm from moving freely.
  • Check for an ice buildup behind the ice maker and melt with a hair dryer if needed.
  • Inspect the mold cups and wires for any dirt, grime, or mineral deposits. Clean as needed.
  • If the reset arm won’t stay in correct position, the arm spring may be worn out and need replacement.
  • Listen for buzzing/clicking noises. No noise likely means a failed mold thermostat or loose wiring connections.

When to Call a Repair Service

If you’ve reset the ice maker multiple times with no luck, it may be time to call in a repair service.

A technician can diagnose the exact issue and properly fix or replace any defective components. Leaving a malfunctioning ice maker unchecked can potentially damage the refrigerator.

Kenmore ice maker Reset (Conclusion)

A Kenmore ice maker reset takes just minutes to complete and has your ice production back on track. Before calling for expensive repairs, try the easy reset first.

In many cases, it’s the fastest solution for restoring ice making capabilities.

With the right knowledge of where the reset button is located and what to look for after resetting, you can have chilled drinks and ice for parties again in no time.

Save yourself the hassle and reset your Kenmore ice maker at the first sign of trouble.

Also Read :

Kenmore Freezer Not Freezing (Discover Quick Fixes That Work)

Kenmore Refrigerator Ice Maker On off Switch Not Working? Quick & Easy fix

Leave a Comment

Your email address will not be published. Required fields are marked *